Peptide Conformation Research Articles

Altering Conformational States of Dynamic Ion Populations using Traveling Wave Structures for Lossless Ion Manipulations.

With its capacity to store and translate ions across considerable distances and times, traveling wave structures for lossless ion manipulations (TW-SLIM) provide the foundation to expand the scope of ion mobility spectrometry (IMS) experiments. While promising, the dynamic electric fields and consequential ion-neutral collisions used to realize extensive degrees of separation have a considerable impact on the empirical results and the fundamental interpretation of observed arrival time distributions. Using a custom-designed set of TW-SLIM boards (∼9 m) coupled with a time-of-flight mass spectrometer (SLIM-ToF), we detail the capacity to systematically alter the gas-phase distribution of select peptide conformers. In addition to discussing the role charge-transfer may play in TW-SLIM experiments that occur at extended time scales, the ability of the SLIM-ToF to perform tandem IMS was leveraged to confirm that both the compact and elongated conformers of bradykinin2+ undergo interconversion within the SLIM. Storage experiments in which ions are confined within SLIM using static potential wells suggest that factors aside from TW-induced ion motion contribute to interconversion. Further investigation into this matter suggests that the use of radio frequency (RF) fields to confine ions within SLIM may play a role in ion heating. Aside from interconversion, storage experiments also provide insight into charge transfer behavior over the course of extended periods. The results of the presented experiments suggest that considerations should be taken when analyzing labile species and inform strategies for the TW-SLIM design and method development.

In Silico Study of the Early Stages of Aggregation of β Sheet-forming Antimicrobial Peptide GL13K.

Antimicrobial peptides (AMPs) are of growing interest as potential candidates that may offer more resilience against antimicrobial resistance than traditional antibiotic agents. In this article, we perform the first in silico study of the syntheticß sheet-forming AMP GL13K. Through atomistic simulations of single and multi-peptide systems under different conditions, we are able to shine a light on the short timescales of early aggregation. We find that isolated peptide conformations are primarily dictated by sequence rather than charge, whereas changing charge has a significant impact on the conformational free energy landscape of multi-peptide systems. We demonstrate that the loss of charge-charge repulsion is a sufficient minimal model for experimentally observed aggregation. Overall, our work explores the molecular biophysical underpinnings of the first stages of aggregation of a unique AMP, laying necessary groundwork for its further development as an antibiotic candidate.

Binding Dynamics of a Stapled Peptide Targeting the Transcription Factor NF-Y.

Transcription factors (TFs) play a central role in gene regulation, and their malfunction can result in a plethora of severe diseases. TFs are therefore interesting therapeutic targets, but their involvement in protein-protein interaction networks and the frequent lack of well-defined binding pockets render them challenging targets for classical small molecules. As an alternative, peptide-based scaffolds have proven useful, in particular with an α-helical active conformation. Peptide-based strategies often require extensive structural optimization efforts, which could benefit from a more detailed understanding of the dynamics in inhibitor/protein interactions. In this study, we investigate how truncated stapled α-helical peptides interact with the transcription factor Nuclear Factor-Y (NF-Y). We identified a 13-mer minimal binding core region, for which two crystal structures with an altered C-terminal peptide conformation when bound to NF-Y were obtained. Subsequent molecular dynamics simulations confirmed that the C-terminal part of the stapled peptide is indeed relatively flexible while still showing defined interactions with NF-Y. Our findings highlight the importance of flexibility in the bound state of peptides, which can contribute to overall binding affinity.

Unfolding Protein-Based Hapten Coupling via Thiol-Maleimide Click Chemistry: Enhanced Immunogenicity in Anti-Nicotine Vaccines Based on a Novel Conjugation Method and MPL/QS-21 Adjuvants.

Vaccines typically work by eliciting an immune response against larger antigens like polysaccharides or proteins. Small molecules like nicotine, on their own, usually cannot elicit a strong immune response. To overcome this, anti-nicotine vaccines often conjugate nicotine molecules to a carrier protein by carbodiimide crosslinking chemistry to make them polymeric and more immunogenic. The reaction is sensitive to conditions such as pH, temperature, and the concentration of reactants. Scaling up the reaction from laboratory to industrial scales while maintaining consistency and yield can be challenging. Despite various approaches, no licensed anti-nicotine vaccine has been approved so far due to the susboptimal antibody titers. Here, we report a novel approach to conjugate maleimide-modified nicotine hapten with a disulfide bond-reduced carrier protein in an organic solvent. It has two advantages compared with other approaches: (1) The protein was unfolded to make the peptide conformation more flexible and expose more conjugation sites; (2) thiol-maleimide "click" chemistry was utilized to conjugate the disulfide bond-reduced protein and maleimide-modified nicotine due to its availability, fast kinetics, and bio-orthogonality. Various nicotine conjugate vaccines were prepared via this strategy, and their immunology effects were investigated by using MPL and QS-21 as adjuvants. The in vivo study in mice showed that the nicotine-BSA conjugate vaccines induced high anti-nicotine IgG antibody titers, compared with vaccines prepared by using traditional condensation methods, indicating the success of the current strategy for further anti-nicotine or other small-molecule vaccine studies. The enhancement was more significant by using MPL and QS-21 than that of traditional aluminum adjuvants.

Detection of Cadmium(II) in Aquatic Products Using a Rolling-Circle Amplification-Coupled Ratio Fluorescent Probe Based on an Aptamer-Peptide Conjugate.

The existing aptamers for cadmium (Cd2+), the common toxic heavy metal contaminant in food, cannot meet the requirements for detecting Cd2+ in rapid detection methods. In previous work, we found that coupling aptamer-peptide conjugates (APCs) with peptides and aptamers can provide a less disruptive method with a significantly improved affinity. Moreover, we found that the spatial conformation of aptamers and peptides is crucial for obtaining proper affinity in APC. Therefore, we describe a simple design strategy to obtain a series of APCs with different affinities by designing peptide orientations (N-terminal, C-terminal). The best affinity was found for APC(C1-N) with a binding constant (Ka) of 2.23 × 106 M-1, indicating that the APC(C1-N) affinity was significantly increased by 829.17% over aptamer. Finally, a rolling-circle amplification (RCA)-coupled ratio fluorescence-based biosensor for Cd2+ detection was established with a detection limit of 0.0036 nM, which has great potential for practical aquatic product detection.

Estimation of Peptide Helicity from Circular Dichroism Using the Ensemble Model.

An established method for the quantitation of the helix content in peptides using circular dichroism (CD) relies on the linear spectroscopic model. This model assumes an average value of the helix-length correction for all peptide conformers, irrespective of the length of the helical segment. Here we assess the validity of this approximation and introduce a more physically realistic ensemble-based analysis of the CD signal in which the length correction is assigned specifically to each ensemble conformer. We demonstrate that the linear model underestimates peptide helicity, with the difference depending on the ensemble composition. We developed a computer program that implements the ensemble model to estimate the peptide helicity. Using this model and the CD data set covering a broad range of helicities, we recalibrate CD baseline parameters and redetermine helix-coil parameters for the alanine-rich peptide. We show that the ensemble model leverages small differences in signal between conformers to extract more information from the experimental data, enabling the determination of several poorly defined quantities, such as the nucleation constant and heat capacity change associated with helix folding. Overall, the presented ensemble-based treatment of the CD signal, together with the recalibrated values of the spectroscopic baseline parameters, provides a coherent framework for the analysis of the peptide helix content.

Applications of biaryl cyclization in the synthesis of cyclic enkephalin analogs with a highly restricted flexibility

A series of 10 cyclic, biaryl analogs of enkephalin, with Tyr or Phe residues at positions 1 and 4, were synthesized according to the Miyaura borylation and Suzuki coupling methodology. Biaryl bridges formed by side chains of the two aromatic amino acid residues are of the meta–meta, meta–para, para–meta, and para–para configuration. Conformational properties of the peptides were studied by CD and NMR. CD studies allowed only to compare conformations of individual peptides while NMR investigations followed by XPLOR calculations provided detailed information on their conformation. Reliability of the XPLOR calculations was confirmed by quantum chemical ones performed for one of the analogs. No intramolecular hydrogen bonds were found in all the peptides. They are folded and adopt the type IV β-turn conformation. Due to a large steric strain, the aromatic carbon atoms forming the biaryl bond are distinctly pyramidalized. Seven of the peptides were tested in vitro for their affinity for the µ-opioid receptor.

Effect of N-o-nitrobenzylation on conformation and membrane permeability of linear peptides

In this study, we explored the potential of the photoremovable o-nitrobenzyl (oNB) group as a tool to manipulate the membrane permeability and regulate the conformation of linear peptides by means of experimental and computational studies. We found that the introduction of one or more oNB groups markedly increased the permeability and altered the conformation, as compared to the corresponding unmodified peptides. We thoroughly investigated the impact of peptide length, number of oNB group, oNB insertion position, and introduction of N- and C-terminal protecting groups on the passive membrane permeability by means of parallel artificial membrane permeability assay (PAMPA). Photoreaction of peptides containing one or two oNB groups proceeded cleanly in moderate to high yields, releasing the unprotected parent linear peptide. The oNB-modified peptides showed a cis/trans conformational equilibrium, while after photolysis, the unprotected linear peptides showed only the trans-amide conformation. Furthermore, a comprehensive comparison of oNB-modified peptides and N-methylated peptides was conducted, encompassing conformational analysis and physicochemical properties. N-Substituted peptides favored a folded-like structure, which may contribute to the improvement in permeability.

Molecular Dynamics Simulations of Polyelectrolyte Complexes.

Polyelectrolyte complexes (PECs) are currently of great interest due to their applications toward developing new adaptive materials and their relevance in membraneless organelles. These complexes emerge during phase separation when oppositely charged polymers are mixed in aqueous media. Peptide-based PECs are particularly useful toward developing new drug delivery methods due to their inherent biocompatibility. The underlying peptide sequence can be tuned to optimize specific material properties of the complex, such as interfacial tension and viscosity. Given their applicability, it would be advantageous to understand the underlying sequence-dependent phase behavior of oppositely charged peptides. Here, we report microsecond molecular dynamic simulations to characterize the effect of hydrophobicity on the sequence-dependent peptide conformation for model polypeptide sequences that were previously reported by Tabandeh et al. These sequences are designed with alternating chirality of the peptide backbone. We present microsecond simulations of six oppositely charged peptide pairs, characterizing the sequence-dependent effect on peptide size, degree of hydrogen bonding, secondary structure, and conformation. This analysis recapitulates sensible trends in peptide conformation and degree of hydrogen bonding, consistent with experimentally reported results. Ramachandran plots reveal that backbone conformation at the single amino acid level is highly influenced by the neighboring sequence in the chain. These results give insight into how subtle changes in hydrophobic side chain size and chirality influence the strength of hydrogen bonding between the chains and, ultimately, the secondary structure. Furthermore, principal component analysis reveals that the minimum energy structures may be subtly modulated by the underlying sequence.

Conformation of Pyroglutamated Amyloid β (3-40) and (11-40) Fibrils - Extended or Hairpin?

Amyloid β (Aβ) is a hallmark protein of Alzheimer's disease. One physiologically important Aβ variant is formed by initial N-terminal truncation at a glutamic acid position (either E3 or E11), which is subsequently cyclized to a pyroglutamate (either pE3 or pE11). Both forms have been found in high concentrations in the core of amyloid plaques and are likely of high importance in the pathology of Alzheimer's disease. However, the molecular structure of the fibrils of these variants is not entirely clear. Solid-state NMR spectroscopy studies have reported a molecular contact between Gly25 and Ile31, which would disagree with the conventional hairpin model of wildtype (WT-)Aβ1-40 fibrils, most often described in the literature. We investigated the conformation of the monomeric unit of pE3-Aβ3-40 and pE11-Aβ11-40 (and for comparison also wildtype (WT)-Aβ1-40) fibrils to find out whether the hairpin or a newly suggested extended structure dominates the structure of the Aβ monomers in these fibrils. To this end, solid-state NMR spectroscopy was applied probing the inter-residual contacts between Phe19/Leu34, Ala21/Leu34, and especially Gly25/Ile31 using suitable isotopic labeling schemes. In the second part, the flexible turn of the Aβ40 peptides was replaced by a (3-(3-aminomethyl)phenylazo)phenylacetic acid (AMPP)-based photoswitch, which can predefine the peptide conformation to either an extended (trans) or hairpin (cis) conformation. This enables simultaneous spectroscopic assessment of the conformation of the AMPP-photoswitch, allowing in situ structural investigations during fibrillation in contrast to structural techniques such as NMR spectroscopy or cryo-EM, which can only be applied to stable conformers. Both methods confirm an extended structure for the peptidic monomers in fibrils of all investigated Aβ variants. Especially the Gly25/Ile31 contact is a decisive indicator for the extended structure along with the characteristic absorption spectra of trans-AMPP-Aβ.

Alternative Linkage Chemistries in the Chemoenzymatic Synthesis of Microviridin-Based Cyclic Peptides.

Engineering biosynthetic pathways to ribosomally synthesized and post-translationally modified peptides (RiPPs) offers several advantages for both in vivo and in vitro applications. Here we probe the ability of peptide cyclases to generate trimacrocycle microviridin analogs with non-native cross-links. The results demonstrate that diverse chemistries are tolerated by macrocyclases in the ATP-grasp family and allow for the construction of unique cyclic peptide architectures that retain protease inhibition activity. In addition, cocomplex structures of analogs bound to a model protease were determined, illustrating how changes in functional groups maintain peptide conformation and target binding.

Information bottleneck in peptide conformation determination by x-ray absorption spectroscopy

We apply a recently developed technique utilizing machine learning for statistical analysis of computational nitrogen K-edge spectra of aqueous triglycine. This method, the emulator-based component analysis, identifies spectrally relevant structural degrees of freedom from a data set filtering irrelevant ones out. Thus tremendous reduction in the dimensionality of the ill-posed nonlinear inverse problem of spectrum interpretation is achieved. Structural and spectral variation across the sampled phase space is notable. Using these data, we train a neural network to predict the intensities of spectral regions of interest from the structure. These regions are defined by the temperature-difference profile of the simulated spectra, and the analysis yields a structural interpretation for their behavior. Even though the utilized local many-body tensor representation implicitly encodes the secondary structure of the peptide, our approach proves that this information is irrecoverable from the spectra. A hard x-ray Raman scattering experiment confirms the overall sensibility of the simulated spectra, but the predicted temperature-dependent effects therein remain beyond the achieved statistical confidence level.

How do Antimicrobial Peptides Interact with the Outer Membrane of Gram-Negative Bacteria? Role of Lipopolysaccharides in Peptide Binding, Anchoring, and Penetration.

Gram-negative bacteria possess a complex structural cell envelope that constitutes a barrier for antimicrobial peptides that neutralize the microbes by disrupting their cell membranes. Computational and experimental approaches were used to study a model outer membrane interaction with an antimicrobial peptide, melittin. The investigated membrane included di[3-deoxy-d-manno-octulosonyl]-lipid A (KLA) in the outer leaflet and 1-palmitoyl-2-oleoyl-sn-glycero-3-phosphoethanolamine (POPE) in the inner leaflet. Molecular dynamics simulations revealed that the positively charged helical C-terminus of melittin anchors rapidly into the hydrophilic headgroup region of KLA, while the flexible N-terminus makes contacts with the phosphate groups of KLA, supporting melittin penetration into the boundary between the hydrophilic and hydrophobic regions of the lipids. Electrochemical techniques confirmed the binding of melittin to the model membrane. To probe the peptide conformation and orientation during interaction with the membrane, polarization modulation infrared reflection absorption spectroscopy was used. The measurements revealed conformational changes in the peptide, accompanied by reorientation and translocation of the peptide at the membrane surface. The study suggests that melittin insertion into the outer membrane affects its permeability and capacitance but does not disturb the membrane's bilayer structure, indicating a distinct mechanism of the peptide action on the outer membrane of Gram-negative bacteria.

In-Bridge Stereochemistry: A Determinant of Stapled Peptide Conformation and Activity.

Peptide side chain stapling has been proven to be an effective strategy for fine-tuning peptide properties. This innovative approach leads to the creation of stapled peptides characterized by stabilized α-helical conformations, enhanced protein-binding affinity, improved cell permeability, superior enzymatic stability, and numerous other advantages. Extensive research has explored the impact of various stapling bridges on the properties of these peptides, with limited investigation into the influence of bridge chirality, until very recently. In this concise review, we provide a brief overview of the current state of knowledge regarding the stereochemistry within the bridges of stapled peptides, offering insights into the potential applications of chiral bridges in the design and development of stapled peptides.

Characterization of Posttranslationally Modified PHF-1 Tau Peptides Using Gaussian Accelerated Molecular Dynamics Simulation.

The microtubule-associated protein, Tau, is an intrinsically disordered protein that plays a crucial role in neurodegenerative diseases like Alzheimer's disease. The posttranslational modifications across the Tau protein domains are involved in regulating Tau protein's function and disease onset. Of the various posttranslational modifications at Ser, Thr, and Tyr sites, O-GlcNAcylation and phosphorylation are the most critical ones, playing a vital role in Tau aggregation and tauopathies. To understand the function, it is essential to characterize the structural changes associated withTaumodification. Previous experimental studies have focused on high-resolution nuclear magnetic resonance techniques to structurally characterize the effect of phosphorylation, O-GlcNAcylation, and combination of both PTMs on Tau conformation in small peptides centered on the PHF-1 epitope from amino acid 392 to 411. The structural characterization using atomistic molecular dynamics simulation of such disordered peptides requires long simulation time, proper sampling method, and utilization of appropriate force fields for accurate determination of conformational ensembles, resembling the experimental data. This chapter details the protocol for the structural characterization of modified Tau peptides using the CHARMM36m force field and enhanced sampling methods like Gaussian accelerated molecular dynamics (GaMD) simulation. We have focused on a detailed explanation of the GaMD method and analyses of molecular dynamics trajectories to explain the relationship between two modifications, phospho- and glyco-, at C-terminus of Tau protein and its stable conformation over the longer simulation timeframes. The analyses involve energetics reweighting, clustering of simulation trajectories, and characterization of secondary structure using circular dichroism data from the simulation. The reader can utilize this protocol to investigate the structures of complex proteins, especially the disordered ones.

Electronic substituent effect on the conformation of a phenylalanine-incorporated cyclic peptide.

The Phe-incorporated cyclic peptide [cyclo(-Phe1-oxazoline2-d-Val3-thiazole4-Ile5-oxazoline6-d-Val7-thiazole8-)] is in a conformational equilibrium between square and folded forms in solution. In the folded form, a CH⋯π interaction between the Phe1 aromatic ring and the Oxz2 methyl group is observed. We endeavored to control the local conformation and thus modulate the CH⋯π interaction and flexibility of the Phe1 side chain by controlling the electronic substituent effects at the 4-position of the aromatic ring of the Phe1 residue. The effect of the 4-substituent on the global conformation was indicated by the linear relationship between the conformational free energies (ΔGo) determined through NMR-based quantification and the Hammett constants (σ). Electron-donating substituents, which had relatively strong CH⋯π interactions, promoted peptide folding by restraining the loss in entropy. Local control by the 4-substituent effects suggested that the Phe side chain exerts an entropic influence on the folding of these cyclic peptides.

Conformations of Macrocyclic Peptides Sampled by Nuclear Magnetic Resonance: Models for Cell-Permeability.

The biological activities and pharmacological properties of peptides and peptide mimetics are determined by their conformational states. Therefore, a detailed understanding of the conformational landscape is crucial for rational drug design. Nuclear magnetic resonance (NMR) is the only method for structure determination in solution. However, it remains challenging to determine the structures of peptides using NMR because of very weak nuclear Overhauser effects (NOEs), the semiquantitative nature of the rotating frame Overhauser effect (ROE), and the low number of NOEs/ROEs in N-methylated peptides. In this study, we introduce a new approach to investigating the structures of modified macrocyclic peptides. We utilize exact NOEs (eNOEs) in viscous solvent mixtures to replicate various cellular environments. eNOEs provide detailed structural information for highly dynamic modified peptides. Structures of high precision were obtained for cyclosporin A, with a backbone atom rmsd of 0.10 Å. Distinct conformational states in different environments were identified for omphalotin A (OmphA), a fungal nematotoxic and multiple backbone N-methylated macrocyclic peptides. A model for cell-permeation is presented for OmphA, based on its structures in polar, apolar, and mixed polarity solvents. During the transition from a polar to an apolar environment, OmphA undergoes a rearrangement of its H-bonding network, accompanied by a cis to trans isomerization of the ω torsion angle within a type VIa β-turn. We hypothesize that the kinetics of these conformational transitions play a crucial role in determining the membrane-permeation capabilities of OmphA.

Sculpting Secondary Structure of a Cyclic Peptide: Conformational Analysis of a Cyclic Hexapeptide Containing a Combination of l-Leu, d-Leu, and Aib Residues.

We have previously reported that cyclo(l-Leu-d-Leu-Aib-l-Leu-d-Leu-Aib) (2), a cyclic hexapeptide consisting of heterochiral l-Leu and d-Leu (l-Leu-d-Leu) residues with achiral 2-aminoisobutyric acid (Aib) residues, forms a figure-8 conformation. In this study, we newly designed cyclo(l-Leu-d-Leu-Aib-d-Leu-l-Leu-Aib)+ (4), an epimer of 2, and examined the conformational differences between 2 and 4 by X-ray crystallographic analysis. Peptide 4 formed a planar cyclic conformation with an antiparallel β-sheet hydrogen-bonding pattern. This investigation demonstrates the potential to manipulate the molecular conformation of cyclic peptides by simply arranging the l- and d-amino acids and emphasizes that diverse conformations can be obtained by using cyclic peptides. Harnessing cyclic peptides as platforms for distinct molecular structures is a promising approach to expanding the chemical space for various applications.

Exploring biocompatible chemistry to create stapled and photoswitchable variants of the antimicrobial peptide aurein 1.2.

Antibiotic resistance is an escalating global health threat. Due to their diverse mechanisms of action and evasion of traditional resistance mechanisms, peptides hold promise as future antibiotics. Their ability to disrupt bacterial membranes presents a potential strategy to combat drug-resistant infections and address the increasing need for effective antimicrobial treatments. Amphipathic α-helical peptides possess a distinctive molecular structure with both charged/hydrophilic and hydrophobic regions that interact with the bacterial cell membrane, disrupting its structural integrity. The α-helical amphipathic peptide aurein 1.2, secreted by the Australian frog Litoria aurea, is one of the shortest known antimicrobial peptides, spanning only 13 amino acids. The primary objective of this study was to investigate stapled and photoswitchable modifications of short helical peptides employing biocompatible chemistry, utilising aurein 1.2 as a model system. We developed various stapled versions of aurein 1.2 using biocompatible conjugation chemistry between dicyanopyridine and 1,2-aminothiols. While the commonly employed stapling pattern for longer staples is i, i + 7, we observed superior helicity in peptides stapled at positions i, i + 8. Molecular dynamics simulations confirmed both stapling patterns to support an α-helical peptide conformation. Additionally, we utilised a cysteine-selective photosensitive staple, perfluoro azobenzene, to explore photoswitchable variants of aurein 1.2. A double-cysteine variant stapled at i, i + 7 indeed exhibited a change in overall helicity induced by light. We further demonstrated the applicability of this staple to attach to cysteine residues in i, i + 7 positions of a helix in a model protein. While some of the stapled variants displayed substantial increase in helicity, minimal inhibitory concentration assays revealed that none of the stapled aurein 1.2 variants exhibited increased antimicrobial activity compared to the wildtype.

Exploring a Structural Data Mining Approach to Design Linkers for Head-to-Tail Peptide Cyclization.

Peptides have recently regained interest as therapeutic candidates, but their development remains confronted with several limitations including low bioavailability. Backbone head-to-tail cyclization, i.e., setting a covalent peptide bond linking the last amino acid with the first one, is one effective strategy of peptide-based drug design to stabilize the conformation of bioactive peptides while preserving peptide properties in terms of low toxicity, binding affinity, target selectivity, and preventing enzymatic degradation. Starting from an active peptide, it usually requires the design of a linker of a few amino acids to make it possible to cyclize the peptide, possibly preserving the conformation of the initial peptide and not affecting its activity. However, very little is known about the sequence-structure relationship requirements of designing linkers for peptide cyclization in a rational manner. Recently, we have shown that large-scale data-mining of available protein structures can lead to the precise identification of protein loop conformations, even from remote structural classes. Here, we transpose this approach to linkers, allowing head-to-tail peptide cyclization. First we show that given a linker sequence and the conformation of the linear peptide, it is possible to accurately predict the cyclized peptide conformation. Second, and more importantly, we show that it seems possible to elaborate on the information inferred from protein structures to propose effective candidate linker sequences constrained by length and amino acid composition, providing the first framework for the rational design of head-to-tail cyclization linkers. Finally, we illustrate this for two peptides using a limited set of amino-acids likely not to interfere with peptide function. For a linear peptide derived from Nrf2, the peptide cyclized starting from the experimental structure showed a 26-fold increase in the binding affinity. For urotensin II, a peptide already cyclized by a disulfide bond that exerts a broad array of biological activities, we were able, starting from models of the structure, to design a head-to-tail cyclized peptide, the first synthesized bicyclic 14-residue long urotensin II analogue, showing a retention of in vitro activity. Although preliminary, our results strongly suggest that such an approach has strong potential for cyclic peptide-based drug design.